Sun Hydraulics Coil 770-211

Technical Features

• Coil windings utilize Class N, (392ø F [200 øC] rated) magnet wire.


• A TVS surge suppression diode is built into DC coils. Nominal breakdown voltage; 250V.Model code 1.5 KE250CA. Steady state power dissipation @ 75øC is 6.5 W and peak pulse dissipation is 1500 W for 1 ms, nonrepetitive.


• Power cable with mating connector is required and is not included with product.


• Alternating current (AC) coils are DC coils that contain an integral full wave rectifier, model code 2W10G, molded into the coil. Because of this, there is no pull-in current and coils don’t burn out if something prevents the valve from shifting.


• This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.


• IP rating is dependent on the coil connector and the mating connector used.


• RoHS compliant. Restricted materials less than 0.1% total by weight.

,