3/8" HOSE, JACK HOSE, DIEHARD COVER, 10,
Product Info
Technical Specifications:
Hydraulic Jack applications requiring a light weight, small outside diameter hose. The very high abrasion resistant properties of the DIEHARD cover extend the life of the hose when it is subjected to the abrasion that may cause the premature failure of standard hoses.
Tube: Black, oil resistant synthetic rubber.
Reinforcement: Two braids of high tensile steel wire.
Cover: DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.
FRAS – FLAME RESISTANCE AND ANTI-STATIC: DIEHARD™ complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. **MSHA**” of the US Department of Labor, Mine Safety and Health Administration.
**Temperature Range:**From -40°C to +49°C (-40°F to +120°F).
Working Pressure: Specification IJ 100 (July 1979) is based on 2:1 minimum burst to maximum working pressure safety factor and is suitable for 700 bar/10,000 psi use in hydraulic jack applications ONLY.
Meets or Exceeds the Performance Requirements of:
Materials Handling Institute specification IJ 100 (July 1979)
for hydraulic hose and assemblies used with jacking systems.
0.34
Hydraulic Hose
Item Specifications
-
5"
-
3/8"
-
2
-
0.74"
-
Two braids of high tensile steel wire
-
IJ 100
-
10000
-
1.00 lbs per
Qty Breaks Available
| 1-43 | $6.10 |
| 44-215 | $5.80 |
| 216-538 | $5.52 |
| 539-862 | $5.04 |
| 863+ | $4.64 |