1/4" HOSE, ISOBARIC, DIEHARD COVER, 3500
Product Info
Technical Specifications:
High pressure hydraulic oil lines. Constant pressure (Isobaric) 215 bar / 3100 psi in all sizes. Small bend radius and compact dimensions are advantages in installations.
Tube: Black, oil resistant synthetic rubber.
Reinforcement: One braid (-04 to -08 size) or two braids (-10 to -16 size) of high tensile steel wire.
Cover: DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.
FRAS – FLAME RESISTANCE AND ANTI-STATIC:
DIEHARD™ complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. **MSHA**” of the US Department of Labor, Mine Safety and Health Administration.
Temperature Range:-40°C to +100°C (-40°F to +212°F).
Working Pressure: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
Tested to 1 million impulse cycles. Constant pressure 215 bar / 3100 psi in all sizes for easy system design and hose selection. Small bend radius and compact dimensions are advantages in installations.
0.11
Hydraulic Hose
Item Specifications
-
1.5"
-
1/4"
-
1
-
0.46"
-
One braid (-04 to -08 size) or two braids (-10 to -16 size) of high tinsle steel wire.
-
SAE 100R17
-
3500
-
0.44 lbs per
Qty Breaks Available
| 1-81 | $3.21 |
| 82-409 | $3.05 |
| 410-1024 | $2.90 |
| 1025-1639 | $2.65 |
| 1640+ | $2.44 |