1-1/4" HOSE, ISOBARIC SPIRAL, SLIDER COV
Product Info
Technical Specifications: Very high pressure hydraulic oil lines. Constant pressure (Isobaric) 350 bar / 5100 psi in all sizes. Small bend radius is an advantage in installations.
Tube: Black, oil resistant synthetic rubber.
Reinforcement: Four (-06 to -20 size) and six (-24 to -32 size) alternating layers of spiralled high tensile steel wire.
Cover: SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T6000 & T7000 Series Crimp Couplings.
Meets or Exceeds the Performance Requirements of:
EN 856 Type R13, ISO 18752-CC, SAE SAE 100R13.
MSHA – FLAME RESISTANCE: SLIDER complies with Flame Resistant requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B. Meets Flame Resistant Designation “U.S. **MSHA**” of the US Department of Labor, Mine Safety and Health Administration.
Temperature Range:-40°C to +121°C, (-40°F to +250°F.)
Working Pressure: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
Tested to 1 million impulse cycles at up to 1/2 SAE SAE 100R13 Minimum Bend Radius. Constant pressure 350 bar / 5100 psi in all sizes for easy system design and hose selection. Small bend radius is an advantage in installations.
1.63
Hydraulic Hose
Item Specifications
-
8.3"
-
1 1/4"
-
4
-
1.77"
-
Four (-06 to -20 size) and six (-24 to -32 size) alternating layers of spiralled high tensile steel wire.
-
SAE 100R13
-
5100
-
1.63 lbs per
Qty Breaks Available
| 1-6 | $43.22 |
| 7-30 | $41.05 |
| 31-76 | $39.10 |
| 77-121 | $35.70 |
| 122+ | $32.84 |