1" HOSE, ISOBARIC SPIRAL, DIEHARD COVER,
Product Info
Technical Specifications: Very high pressure hydraulic oil lines. Constant pressure (Isobaric) 350 bar / 5100 psi in all sizes. Small bend radius is an advantage in installations.
Tube: Black, oil resistant synthetic rubber.
Reinforcement: Four (-06 to -20 size) and six (-24 to -32 size) alternating layers of spiralled high tensile steel wire.
Cover: DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T6000 & T7000 Series Crimp Couplings.
Meets or Exceeds the Performance Requirements of:
EN 856 Type R13, ISO 18752-CC, SAE SAE 100R13.
FRAS – FLAME RESISTANCE AND ANTI-STATIC: DIEHARD™ complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. **MSHA**” of the US Department of Labor, Mine Safety and Health Administration.
Temperature Range:-40°C to +121°C, (-40°F to +250°F.)
Working Pressure: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
Tested to 1 million impulse cycles at up to 1/2 SAE SAE 100R13 Minimum Bend Radius. Constant pressure 350 bar / 5100 psi in all sizes for easy system design and hose selection. Small bend radius is an advantage in installations.
1.16
Hydraulic Hose
Item Specifications
-
5.9"
-
1"
-
4
-
1.45"
-
Four (-06 to -20 size) and six (-24 to -32 size) alternating layers of spiralled high tensile steel wire.
-
SAE 100R13
-
5100
-
1.16 lbs per
Qty Breaks Available
| 1-12 | $20.81 |
| 13-63 | $19.77 |
| 64-158 | $18.83 |
| 159-252 | $17.19 |
| 253+ | $15.82 |