3/4" ID, 4 Wire Hydraulic Hose (H1212D)

Recommended For: Very high pressure hydraulic oil lines, in applications where the outside cover of the hose is subject to abrasion that may cause premature failure of standard hoses.

Tube: Black, oil resistant synthetic rubber.

Reinforcement: Multiple alternating layers of spiralled high tensile steel wire.

Cover: DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T700 Series BITELOK Crimp Couplings.

Features: The very high abrasion resistant properties of the cover, combined with the extra high working pressures and excellent impulse life, when tested to SAE 100R12 test conditions, result in increased service life and minimise equipment downtime.

FRAS – FLAME RESISTANCE AND ANTI-STATIC: Complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

Temperature Range From -40°C to +121°C (-40°F to +250°F). For water, emulsions etc. contact RYCO.

Working Pressure: Maximum working pressures are based on 4:1 safety factor (minimum burst to maximum working pressure).

Couplings: BITELOK NON-SKIVE ONE-PIECE CRIMP
T700 Series (sizes -06 to -40). Assembly Instructions per RYCO Product Technical Manual.