Search in Category
Filter Your Search
Continuous Pressure
Displacement (CU IN)
Keyway
Pressure Port Threads
Rotation
Shaft Diameter
Shaft Type
Suction Port threads
Suction Port Threads
Shop by Category
Gear Pumps
WOLVERINE GEAR PUMP, 1.01 CU IN/REV,3600
WPA16A2R, 1.01 Cu. In./Rev
WPA16A2R, 1.01 Cu. In./Rev
*100% tested for quality assurance *Hard chrome rod plating for corrosion & wear resistance *Cast steel end fittings for high strength & low cost *Top port design *SAE O-ring ports for reliable & leak-free connection *Thread-in gland design for serviceability *Grease zerks included for extended pin life*High luster black paint for protection from the elements *Individually bagged & boxed for secure storage & transport
Quiet Gear Pump, 39 cc/rev , -20-16 port
Constructed of an aluminum center section and cast iron end plates, model 3AHPG is a high pressure hydraulic gear pump with 10 displacement sixes from 1.34-5.43 in^3/rev (22-89 cm^3/rev). The standard mounting flange is a SAE B- 2 Bolt. The standard drive shaft is a 7/8” straight shaft with a 1/4” key.
GEAR PUMP 1.97 CU IN /REV 3300 PSI
WPB32A6R, 1.97 Cu. In./Rev
WPB32A6R, 1.97 Cu. In./Rev
*100% tested for quality assurance *Hard chrome rod plating for corrosion & wear resistance *Cast steel end fittings for high strength & low cost *Top port design *SAE O-ring ports for reliable & leak-free connection *Thread-in gland design for serviceability *Grease zerks included for extended pin life*High luster black paint for protection from the elements *Individually bagged & boxed for secure storage & transport
Quiet Gear Pump, 12 cc/rev ,-12-10 ports
Constructed of an aluminum center section and cast iron end plates, model 2AHPG is a high pressure hydraulic gear pump with 10 displacement sixes from 0.24-1.95 in^3/rev (4-32 cm^3/rev). The standard mounting flange is a SAE A- 2 Bolt. The standard drive shaft is a 5/8” straight shaft with a 5/32” key.
Quiet Gear Pump, 28 cc/rev , -16-12 port
Constructed of an aluminum center section and cast iron end plates, model 2AHPG is a high pressure hydraulic gear pump with 10 displacement sixes from 0.24-1.95 in^3/rev (4-32 cm^3/rev). The standard mounting flange is a SAE A- 2 Bolt. The standard drive shaft is a 5/8” straight shaft with a 5/32” key.
WOLVERINE GEAR PUMP, 1.37 CU IN/REV, 360
WPA23A2R, 1.37 Cu. In./Rev
WPA23A2R, 1.37 Cu. In./Rev
*100% tested for quality assurance *Hard chrome rod plating for corrosion & wear resistance *Cast steel end fittings for high strength & low cost *Top port design *SAE O-ring ports for reliable & leak-free connection *Thread-in gland design for serviceability *Grease zerks included for extended pin life*High luster black paint for protection from the elements *Individually bagged & boxed for secure storage & transport
Quiet Gear Pump, 20 cc/rev , -16-12 port
Constructed of an aluminum center section and cast iron end plates, model 2AHPG is a high pressure hydraulic gear pump with 10 displacement sixes from 0.24-1.95 in^3/rev (4-32 cm^3/rev). The standard mounting flange is a SAE A- 2 Bolt. The standard drive shaft is a 5/8” straight shaft with a 5/32” key.
SINGLE PUMP-HEAVY, 3349110055, .61 Cu in
SINGLE PUMP-HEAVY
3349110055
PH511A193BEAQ10-97
GEAR PUMP,2BOLTA,1/2"KEYED SHA .31 CU/IN
GEAR PUMP,2BOLT A,1/2“KEYED SHAFT
P5-05
P5A193BEAQ05-26
GEAR PUMP, 0.7 CU IN/REV, 3000 PSI, DUAL
The series 40 gear pumps feature a gear tooth design that provides more displacement within a given package size. Available in 6 sizes, with displacements from .50 to 1.80 cubic inch per revolution, this compact pump can deliver up to 17.5 gpm in a space less than 5” x 5 1/4”. Gear tooth design and pressure-balanced loading plates provide high volumetric and overall efficiency while operating at a low noise level.
40PH07DACSC – .750 Cu. In./Rev
